Celling-mounted Single Girder Suspension Overhead Crane
Space-saver in small or low halls
The single girder suspension crane requires very little space and runs on the bottom flange of the crane runway, which is mounted on roof beams or directly on the ceiling. The complete width of the hall is thus available. The distance between the load hook and side walls is extremely small in this case. With this type of crane it is possible to connect various suspension cranes with the help of a crane interlock to enable them to pass hoists with or without loads. In this way it is possible to reach any and every point in a combined system. Passing on a spur runway is also possible.- Type:LX
- Lifting Capacity:1~16 ton
- Lifting Height:
- Span:3~15m
- Working Duty:A3,
- Ambient Temperature:-20~40℃
 |
 |
Ceiling-mounted overhead cranes are ideal for applications with a limited footprint, facilities with large mobile equipment, and facility layouts that may change in the future.
Suspension Single Girder Overhead Crane Parameters Table
| Capacity | Span | Lifting height | Lifting speed | Trolley speed | Crane speed | Work duty |
| S(m) | m | m/min | m/min | m/min | ||
| 0.5 tons | 3~22.5 | 6~30 | 8(0.8/8) | 20(30) | 20(30) | A3~A4 |
| 1 ton | 3~22.5 | 6~30 | 8(0.8/8) | 20(30) | 20(30) | A3~A4 |
| 2 tons | 3~22.5 | 6~30 | 8(0.8/8) | 20(30) | 20(30) | A3~A4 |
| 3 tons | 3~22.5 | 6~30 | 8(0.8/8) | 20(30) | 20(30) | A3~A4 |
| 5 tons | 3~22.5 | 6~30 | 8(0.8/8) | 20(30) | 20(30) | A3~A4 |
| 10 tons | 3~22.5 | 9~30 | 7(0.7/7) | 20(30) | 20(30) | A3~A4 |